13
. REAR WHEEL/REAR BRAKE/
REAR SUSPENSION
REAR BRAKE
BRAKE LINING INSPECTION
Measure the brake lining thickness.
Service Limit: 2.0mm replace if below
Keep oil or grease off the brake linings.
REAR BRAKE DISASSEMBLY
Remove the rear brake adjusting nut and
disconnect the rear brake cable.
Remove the rear brake shoes.
Remove the brake arm bolt to remove the
brake arm, wear indicator plate and felt seal.
Remove the brake cam.
REAR BRAKE ASSEMBLY
Apply grease to the anchor pin.
Apply grease to the brake cam and install it.
Install the brake shoes.
13-3
Brake Arm
Adjusting Nut
Brake Arm Bolt
Wear Indicator Plate
Brake Arm
Grease
AGILITY 50
Brake Shoes
Brake Cam