KYMCO AGILITY 125 Service Manual page 74

6. ENGINE REMOVAL/INSTALLATION
Loosen the drive belt air cleaner connecting
tube band screw and remove the connecting
tube.
Remove the rear brake adjusting nut,
connector pin rear brake cable.
Remove the rear shock absorber upper mount
bolt.
Remove the engine mounting bolt and move
the motorcycle forward to separate it from the
engine.
Support the motorcycle with a floor jack.
6-3
Air Tube Band
connecting tube
Adjusting Nut
Rear Shock Absorber Upper Mount Bolt
Engine Hanger
Bracket Bolt
FILLY LX 50
Engine Mounting Bolt