KYMCO AGILITY 125 Service Manual page 106

9. DRIVE AND DRIVEN PULLEYS/
KICK STARTER
AGILITY 50
Oil Seal
Movable Driven Face
Pull out the guide roller pins and guide rollers.
Remove the movable driven face from the
driven face.
Remove the O-rings and oil seal from the
movable driven face.
Guide Roller Pin
O-rings
INSPECTION
Inspect the clutch outer for wear or damage.
Measure the clutch outer I.D.
Service Limit: 107.5mm replace if over
Check the clutch shoes for wear or damage.
Measure the clutch lining thickness.
Service Limit: 2.0mm replace if below
Measure the driven face spring free length.
Service Limit: 92.8mm replace if below
9-10