Fuel Tank Remove; Fuel Strainer Removal - KYMCO AGILITY 125 Service Manual

5
. FUEL SYSTEM

FUEL TANK REMOVE

Remove the net-in box. ( 2-3)
Remove the frame center cover.
Remove the frame body cover. ( 2-3)
Remove the four bolts on the fuel tank, take
the upper seat lock off.
Disconnect the fuel unit wire connector.
Remove the fuel tank.
The installation sequence is the reverse of
removal.

FUEL STRAINER REMOVAL

Remove the fuel strainer from the fuel tank.
INSPECTION
Inspect if the fuel strainer is clogged and
clean it with compressed air.
When removing the fuel strainer, do
not allow flames or sparks near the
working area and drain the residual
gasoline into a container.
INSTALLATION
Install the fuel strainer with its arrow mark
toward the fuel pump.
5-13
Bolts
Fuel Strainer
Arrow Mark
AGILITY 50
Fuel
Tank
Seat Lock
Fuel Unit Wite
Connector