Starter Pinion - KYMCO AGILITY 125 Service Manual

9. DRIVE AND DRIVEN PULLEYS/
KICK STARTER
INSTALLATION
Install the drive pulley collar and movable
drive face onto the crankshaft.
Set the drive belt on the drive pulley collar.
Install the drive pulley face and tighten the
drive face nut. ( 9-6)
Torque: 5.5~6.5kgf-m
Do not get oil or grease on the drive belt
or pulley faces.

STARTER PINION

REMOVAL
Remove the left crankcase cover.
Remove the drive pulley.
Remove the starter pinion holder.
Remove the starter pinion.
INSPECTION
Inspect the starter pinion shaft forcing part
for wear or damage.
Inspect the starter pinion for smooth
operation.
Inspect the starter pinion and shaft for wear
or damage.
INSTALLATION
Apply a small amount of grease to the starter
pinion shaft and install it in the reverse order
of removal.
AGILITY 50
Movable Drive Face
Drive Pulley Collar
Starter Pinion
Starter Pinion Shaft
9-8