4
. LUBRICATION SYSTEM
SERVICE INFORMATION.......................4-1
TROUBLESHOOTING .............................4-1
SERVICE INFORMATION
GENERAL INSTRUCTIONS
The maintenance of lubrication system can be performed with the engine installed in the frame.
Use care when removing and installing the oil pump not to allow dust and foreign matters to
enter the engine and oil line.
Do not attempt to disassemble the oil pump. The oil pump must be replaced as a set when it
reaches its service limit.
After the oil pump is installed, check each part for oil leaks.
SPECIFICATIONS
Inner rotor-to-outer rotor clearance
Oil pump Outer rotor-to-pump body clearance
Rotor end-to-pump body clearance
TROUBLESHOOTING
Oil level too low
Natural oil consumption
Oil leaks
Worn or poorly installed piston rings
Worn valve guide or seal
4-1
Item
ENGINE OIL/OIL FILTER ...................... 4-2
OIL PUMP................................................. 4-3
Standard (mm)
0.05 0.10
Poor lubrication pressure
Oil level too low
Clogged oil filter or oil passages
Not use the specified oil
AGILITY 50
Service Limit (mm)
0.12
0.12
0.2