Left Crankcase Cover Installation - KYMCO AGILITY 125 Service Manual

9. DRIVE AND DRIVEN PULLEYS/
KICK STARTER
AGILITY 50
Friction Spring
Install the starter driven gear and friction
spring onto the left crankcase cover as the
figure shown.
Starter Driven Gear
First install the washer and then install the
circlip.
Install the kick lever.
Washer Circlip
Dowel Pins
LEFT CRANKCASE COVER
INSTALLATION
First install the dowel pins.
Install the seal rubber.
Seal Rubber
Left Crankcase Cover
Install the left crankcase cover and tighten the
eight left crankcase cover bolts diagonally.
Connect the drive belt air tube and tighten the
tube band screw.
Install the rear brake cable clamp.
Rear Brake Cable Clamp
9-4