Custom Setup; Preset; Custom Initialize; Memory Copy - JRC RADAR 1800 Instruction Manual

CUSTOM SETUP

PRESET

CUSTOM INIT
PRESET
MEMORY YOUR MENU
SETTINGS
TO THE "CUSTOM".
ARE YOU SURE?
YES
CUSTOM INIT.
INITIALIZE ALL MENU
SETTINGS BY THE
"CUSTOM".
ARE YOU SURE?
YES

MEMORY COPY

USE THE CARD >
USE THE PC >
102
CUSTOM SETUP
• You can use this function to store your customized menu setting to a
memory position which can be reloaded later. Press
select CUSTOM SETUP from the menu.
PRESET
• Using this function will store all current menu setting to the Custom
memory.
NO

CUSTOM INITIALIZE

• This function initializes the menu settings to those saved by the
PRESET function.
NO
Note:
• Waypoint and Route information are not stored in Custom memory. If a
Master Reset is done the Custom memory is replaced by factory default
values.
MEMORY COPY
• In this menu, you can store internally set data of such as routes,
waypoints, tracks, marks, and settings into the C-MAP User C-Card,
or transfer the data to the RADAR 1800. You can also transfer the
data to a personal computer.
• This menu includes two submenus USE THE CARD and USE THE
PC.
and
MENU MENU