BEARING
You can select a bearing mode among three bearing mode.
(Refer to "DISPLAY MODE" p.61)
INTERFERENCE REJECTION
The Interference Rejection (IR) can be turned to on or off via this
menu. (Refer to "INTERFERENCE REJECTION" p.62)
SEA
The automatic sea clutter suppress mode can be turned to on or off
via this menu. (Refer to "Setting AUTO/MANUAL SEA Clutter
Rejection" p.63)
TUNE
The AUTO TUNE mode can be turned to on or off via this menu.
(Refer to "Setting AUTO/MANUAL TUNING" p.63)
EXPANDER
The target EXPANDER mode can be turned to on or off via this
menu. (Refer to "Target EXPANDER" p.63)
PROCESS
The radar signal processing mode can select via this menu.
(Refer to "PROCESS" p.64)
TRAILS
This feature allows the operator to see the past history of target
movement or behind the moving targets. The trail interval can select via
this menu. (Refer to "TRAILS" p.64)
CLEAR TRAILS
You can clear the screen. (Refer to "CLEAR TRAILS" p.65)
WAYPOINT
The WAYPOINT mark display can be turned to on or off via this
menu. (Refer to "WAYPOINT" p.65)
COLOR
In this menu, you can select a color for ECHO, TRAILS,
Background of PPI area, and Background of Character area.
(Refer to "Setting radar COLOR" p.65)
89