Table of Contents
Advertisement
SECTION 6
Outline
Interswitch is a device used to switch the antenna between two display units.
The configuration is as shown on the attachment: Set the standard display
unit and antenna to plus; this is then the junction box and two Interswitch cables
and specified sub-unit.
In standard operation, the display unit that is powered up can use the
antenna.
When the display unit that is powered up is using the antenna, and the other
display unit is turned ON, that display unit can access the antenna. The display
unit that can not use the antenna is turned OFF by a function that automatically
cuts the power.
The length of the cables between each unit is shown below.
• Between the antenna and the junction box (10 m)
• Between the junction box and the display unit (10 m)
Components
No.
Description
1
Junction Box
2
Interswitch cable
3
Display Unit
4
Power Cable
5
Fuse(10A)
6
Sun cover
7
Flush Mounting Kit
Interswitch (option)
Model No.
Qty.
NCZ-1432
1
CFQ-6550
2
NCD-4300
1
CFQ-6532
1
1
MTV303270
1
MPTG30914
1
Remarks
10m
2m
123
Advertisement
Table of Contents
