JRC RADAR 1800 Instruction Manual page 47

Color lcd radar-plotter
Table of Contents

Advertisement

46
No. Keys
Functions
r RANGE
Sets range scale by SOFT Key.
t JOY-STICK
Position cursor setting.
Up/Down/Right/Left: Selects and changes an item when each
menu is displayed.
Push:
y NAV
Executes or stops navigation to the desired waypoint or of the
planned route.
u MODE
Switches among the Radar and Plotter mode displays.
i EBL/VRM
Activates EBL or VRM on the display.
A short press will turn on/off selected EBL/VRM.
Press and hold, to select and control the desired EBL or VRM by
rotating the
o CENTER
To shift own ship on radar screen in Radar mode and Radar/
Chart mode.
!0 BRT/CLR
Press and hold, set the brightness or contrast of the LCD with
Joystick
Acknowledge of alarm.
Abort setting value.
!1 TX/OFF
Turns transmitter ON and activates Radome.
Press
!2 STBY/OFF
Turns ON power to Display and Scanner and activates 90 second
count-down timer.
Press to go into Stand-by mode while in the Transmit mode.
Press
!3 Soft Keys
Correspond to Soft Keys displayed at the bottom of the screen.
There may appear up to four Soft Keys according to the displayed
screen.
!4 Card Slot
A built-in world map is available on C-MAP electronic chart.
(C-MAP Card)
Card slot available for more detailed local C-Map charts.
!5 PC I/F Port
Connect a personal computer for saving and loading navigation
data and user settings.
Fixes the set value when each menu is displayed.
Enters a marker when no menu is displayed.
Registers EVENT in the NAVIGATION mode.
.
Jog Dial
or
Jog Dial
.
and
keys simultaneously to turn off.
STBY/OFF
STBY/OFF
TX/OFF
TX/OFF
and
keys simultaneously to turn off.
STBY/OFF
STBY/OFF
TX/OFF
TX/OFF

Advertisement

Table of Contents
loading

Table of Contents