The Configure Library: Email Notification Screen; Entering Email Notification Information Using The Web User Interface; Configuring Snmp Settings - Dell PowerVault TL2000 User Manual

Entering Email Notification Information using the Web User
Interface
This function is not available on the Operator Control Panel.
Use this menu item to set up email notification of library errors and warnings.
1. Click Configure Library → Email Notification in the left navigation pane.
Figure 4-31. The Configure Library: Email Notification screen
2. If you would like to be notified when an error occurs, select Notify Errors.
3. If you would like to be notified when a warning occurs, select Notify
4. In To Email Address, enter the email address to which the information will be
5. In SMTP Server Address (IPv4 or IPv6), enter the IP Address of the SMTP
6. Enter the Domain Name for your library. This field cannot be blank when
7. Click one of the following:

Configuring SNMP Settings

This page shows the current SNMP configuration of the library and allows
modification to the configuration. When a change is requested, a pop-up box
checks to confirm the changes.
1. Click SNMP in the left navigation pane, to display the SNMP page.
Warnings.
sent.
server associated with the email address.
using event notification.
Note: If you attempt to enter a blank value for the Domain Name, a warning
message will appear. It will say If you are using Event Notification then
a value is required for the Domain Name.
v Refresh - to cancel all of your entries and leave the settings as they were.
v Submit - to apply the changes made to the screen.
Chapter 4. Installation and Configuration
4-29