The Configure Library: Drives Page For A 2U Library; The Configure Library: Drives Page For A 4U Library; Configure Library: Network - Dell PowerVault TL2000 User Manual

Figure 5-41. The Configure Library: Drives page for a 2U library
Topology
FC-AL Loop ID
Figure 5-42. The Configure Library: Drives page for a 4U library
Click one of the following:
v Refresh - to cancel the changes made to the screen.
v Submit - to apply the changes made to the screen.
Note: When configuration changes of a disabled drive are made from the Operator

Configure Library: Network

This page shows the current network configuration of the library and allows
modification to the configuration. When a change is requested, a pop-up box
checks confirms the request.
5-50
Dell PowerVault TL2000 Tape Library and TL4000 Tape Library User's Guide
Control Panel (OCP), the drive powers ON after committing changes. When
configuration changes of a disabled drive are made from the Web Interface
(RMU), the drive does not power ON after committing changes.
1. Click Network in the left navigation pane, to display the Network page.