Tapealert Flags Supported By The Drive; Tapealert Flags Supported By The Ultrium Tape Drive - Dell PowerVault TL2000 User Manual

13d Library Pick
Retry
14d Library Place
Retry
15d Drive Load
Retry
16d Library Door
17d Library I/O
Station
19d Library
Security
24d Library
Inventory
27d Cooling FAN
Failure
32d Unreadable
Bar Code
Labels
v I = Informational suggestion to user
v W = Warning. Remedial action is advised. Performance of data may be at risk.
v C = Critical immediate remedial action is required.

TapeAlert Flags Supported by the Drive

Table B-1. TapeAlert Flags Supported by the Ultrium Tape Drive
Flag
Number Flag
3 Hard error
B-2
Dell PowerVault TL2000 Tape Library and TL4000 Tape Library User's Guide
W There is a potential problem with the cartridge loader picking a cartridge
from a drive or slot.
v No action needs to be taken at this time.
v If the problem persists, contact Technical Support
This flag is cleared when the next move command is received.
W There is a potential problem with the cartridge loader placing a cartridge
into a slot.
v No action needs to be taken at this time.
v If the problem persists, contact Technical Support.
This flag is cleared when the next move command is received.
W There is a potential problem with the cartridge loader or drive when
placing a cartridge into a drive.
v No action needs to be taken at this time.
v If the problem persists, contact Technical Support.
This flag is cleared when the next move command is received.
W The operation has failed because the library door is open.
v Clear any obstructions from the library door.
v Close the library door.
v If the problem persists, contact Technical Support.
This flag is cleared when the door is closed.
C There is a mechanical problem with the library media I/O Station.
W Library security has been compromised. The door was opened then
closed during operation.
C The library has detected an inconsistency in its inventory.
v Redo the library inventory to correct inconsistency.
v Restart the operation.
Check the applications users manual or the hardware users manual for
specific instructions on redoing the library inventory.
W One or more fans inside the library have failed. This flag is cleared when
all fans are working again.
I The library was unable to read the barcode on a cartridge.
Description
Set for any unrecoverable read, write,
or positioning error. (This flag is set in
conjunction with flags 4, 5, or 6.)
Action Required
See the Action Required column for
Flag Number 4, 5, or 6 in this table.