Power Supply Led Meanings; A 80W Power Supply Without Leds - Dell PowerVault TL2000 User Manual

Figure 7-2. A 80w power supply without LEDs
If the Library does not power on:
1. With library power OFF and the power cord unplugged, loosen the three
2. Ensure the power cord is plugged in at the power supply ( 6 ) and at the
3. If power appears to be missing
4. For power supplies with LED's, if the "Amber" LED is lit, replace the power
7-8
Dell PowerVault TL2000 Tape Library and TL4000 Tape Library User's Guide
4
Table 7-2. Power Supply LED Meanings
1
If the blue LED is lit, AC voltage is available.
2
If the amber LED is lit, there is a possible fan problem or other power supply
issue. The power supply will need replacement.
3
If the green LED is lit, DC power is OK and active.
4
Cooling Fan Grill
5
Thumb Screws
6
Power Receptacle
thumb screws ( 5 ), grasp two of the thumb screws, pull the power supply out
half way, reseat the power supply, and tighten the three thumb screws.
electrical outlet, then turn library power ON.
a. For power supplies with LED's, the "Blue" LED will be lit if AC power is
good.
b. If your power supply does not have LED's, feel for air flowing out of the
cooling fan grill on the rear of the library ( 4 ). AC is good if air is flowing
from the cooling fan grill.
a. Plug the power cord into another electrical outlet.
b. If power is still missing, plug another device into the outlet to test.
c. If the outlet tests OK, try another power cord with the library.
supply (refer to "Replacing a Power Supply" on page 10-10).
6
5