Configure: Network Menu - Dell PowerVault TL2000 User Manual

Configure: Network
DHCP-ON
Figure 5-16. Configure: Network menu
Use these menu items to change the current network settings which allow you to
access the library remotely via a web browser.
v IP Stack - Choose IPv4 only, IPv6 only, or IPv4 & IPv6.
v IPv6 Only and Dual Stack IPv4 & IPv6 - Choose Enable Stateless Auto Config
5-24
Dell PowerVault TL2000 Tape Library and TL4000 Tape Library User's Guide
Configure
Network
IP Stack
DHCP-OFF
(IPv4 & IPv4+IPv6)
IP Address
Address (Web User Interface) or Stateless Autoconfig (Operator Control Panel) if
Netmask
Gateway
Ethernet
DHCP-OFF
(IPv6)
Stateless
autoconfig
Prefix Length
Static IPv6
Address
Link Local IPv6
Address
Assigned IPv6
Address
Note: This will display
when Stateless Auto
Config is enabled
Gateway
Ethernet