The 4U Library Monitor Library: Library; Drive Identity - Dell PowerVault TL2000 User Manual

Table 5-6. Library Identity page elements (continued)
Menu Item Description
WWide Node This is the Worldwide Node Name assigned to your library.
Name
Logical Library x The Extended Logical Libraries Information table displays information
Library Mode about the logical libraries currently assigned in your library. For each
logical library in your library, either Random or Sequential Loop
Autoload will be displayed.
Figure 5-26. The 4U library Monitor Library: Library Identity page
This view is correct for a library with multiple logical partitions. The Library
Identify screen will be different for a library with a single logical partition.
Monitor Library: Drive Identity
This page provides the following detailed information about the drive. No changes
can be made from this page. The displayed information will vary depending on
the library model and drive type (SCSI, SAS, or Fibre Channel). Table 5-7 lists all
available elements on the Drive Identity page. An "X" indicates that the element
displays for the specified drive type.
Table 5-7. Drive Identity page elements
Menu Item Description
Vendor ID This identifies the manufacturer of the tape drive.
Product ID This is the SCSI inquiry string of the tape drive.
Serial This is the unique identification number of the tape
Number drive that was assigned by the manufacturer.
Firmware This is the current level of firmware installed on the
Revision drive. For information on updating your firmware, refer
to "Service Library: Upgrade Firmware" on page 5-62.
2U
X
X
2U Library
SCSI Fibre SAS SCSI
X X X X
X X X X
X X X X
X X X X
Chapter 5. Operations
4U
X
X
4U Library
Fibre SAS
X X
X X
X X
X X
5-35