Dell PowerVault TL2000 User Manual page 188

Table 8-1. Main Error Codes (continued)
Error Code Description
F1 Drive Communication Error
Library controller has lost
communication to drive
The subcode indicates which drive is
affected.
Example:
Subcode 02: drive #2
F2 Drive Sled not present
The subcode indicates which drive sled
is affected.
Example:
Subcode 02: drive sled #2
F3 Drive Hardware Error
The subcode indicates which drive is
affected.
Example:
F3 xy
Where x refers to the hardware drive
error code (single character display) and
Y refers to the drive position in the
library. x values:
v 4: firmware or hardware error
v 5: hardware error
v 6: hardware or media error
v A: recoverable hardware error
F4 Drive Load Timeout
Drive has run in a timeout while loading
a tape.
The subcode indicates which drive is
affected.
Example:
Subcode 02: drive #2
F5 Drive Unload Timeout
Drive has run in a timeout while
unloading a tape
The subcode indicates which drive is
affected.
Example:
subcode 02: drive #2
8-6
Dell PowerVault TL2000 Tape Library and TL4000 Tape Library User's Guide
User Action
Refer to "Isolating Drive Sled Problems" on page 7-9.