Foot Pads Installed On The Bottom Of The Library Enclosure - Dell PowerVault TL2000 User Manual

Tape library
Hide thumbs Also See for PowerVault TL2000:
Table of Contents

Advertisement

Figure 10-13. Foot pads installed on the bottom of the library enclosure
3. Carefully return the library to an upright position.
4. Remove the shipping lock from the top of the replacement library enclosure
b. For a desktop library:
1) Carefully, lay the library on its side.
2) Peel the adhesive from the back of each of the six foot pads.
3) Install the foot pads on the bottom of the library enclosure by pressing
each foot into one of the six areas ( 1 ) as shown in Figure 10-13.
(see Figure 10-14 on page 10-16).
1
Chapter 10. Check, Adjust, Remove, and Replace
10-15

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powervault tl4000

Table of Contents