Dell PowerVault TL2000 User Manual page 254

Table C-2. LTO Tape Drive Sense Data (continued)
Byte 7
36-39 Port Identifier (Relative Target Port Address) Reporting Sense (This is the port address of the drive port
On Fibre Channel drives, it is the Fibre Channel Fabric Port Address [for example, 011E13 or 000026] with
On SAS drives, it is the Hashed SAS Address of the drive port [for example, F32A94] with byte 36 being
On SCSI, bytes 36 through 38 are reserved, and byte 39 is set to the port's SCSI address [i.e., byte 39 =
40 Tape
Directory
Valid
41
42 Density Type
0: No media present
1: Gen1 (384 track)
2: Gen2 (512 track)
3: Gen3 (704 track)
43
44
45-48
49-52
53
54
55
56
57
58
59
60
61
62
63
64
C-12
Dell PowerVault TL2000 Tape Library and TL4000 Tape Library User's Guide
6 5
through which sense is being reported.
Reserved Reserved
Host Command (SCSI Opcode)
Volume Label Cartridge Type
(Current LBA that would be reported in Read Position command)
Next-to-Last Error Flag Data
Bit Address or Name
4 3
byte 36 being reserved.
reserved.
byte 34].)
Reserved Reserved
Media Type (Vendor Reserved)
Logical Block Number
Data set Number
1st Error FSC
1st Error Flag Data
2nd Error FSC
2nd Error Flag Data
Next-to-Last Error FSC
2 1
Relative Tgt Port Reporting Sense
0: Reserved
1: Relative Tgt Port 1 (Port 0)
2: Relative Tgt Port 2 (Port 1)
3: Relative Tgt Port 3 (Library Port)
0