Advertisement
8. Power up
a. Expansion enclosure
Connect the power cable to the power supply and close the retention bail over the base of the power cable. Connect
the other end of each power cable to PDU A and PDU B. Repeat for all enclosures racked.
b. Base enclosure
Plug each power cable into the base enclosure power supply unit
power cable
the base enclosure automatically starts up.
Dell EMC PowerStore Quick Start Guide
. Connect the other end of each power cable to PDU A and PDU B. After you connect the power cables,
and close the retention bail over the base of the
CL5992
Page 6 of 8
Advertisement
