Installing The Shelf On The Rails; Attaching The Rail To The Rack; Sliding The Enclosure Onto The Rails - Dell DD9500 Manual

Figure 22. Attaching the rail to the rack
NOTE: To secure the rail adapter hardware nuts, you may need to use the supplied wrench or pliers to tighten the nuts.
6. Repeat step 5 for the second rail.
7. After installing both rails, ensure that they are level with one another.

Installing the shelf on the rails

About this task
WARNING:
The enclosure is heavy and should be installed into or removed from a rack by two people. To avoid personal
injury and/or damage to the equipment, do not attempt to lift and install the enclosure into a rack without a
mechanical lift and/or help from another person.
Steps
1. With help from another person, lift the enclosure and, from the front of the cabinet/rack, slide the enclosure onto the rails.
Figure 23. Sliding the enclosure onto the rails
When the enclosure slides to the back of the cabinet, the rear tabs on the rails insert into the two notches in the rear of the
enclosure. The tabs secure and support the rear of the enclosure.
28 Install the Disk Shelves in the Rack
CL4718a