Blank Login Screen
Description
Unable to connect to the NAS Manager and the login screen is
blank.
Cause
Probable causes may be:
Workaround
Backup Power Supply LED Displays a Solid
Amber Light
Description
BPS LED is solid amber, with or without an audible alarm.
Cause
Probable causes may be:
Workaround
If the BPS LED is solid amber and no audible alarm:
For more information about the workaround, see "BPS Alarms" on
page 193.
• Java script is disabled.
• IE SEC is enabled.
• If Java script is disabled, enable Java script. For information about
enabling Java script, see the browser's help.
• If IE SEC is enabled, disable it.
• The BPS is running on battery power with the battery charge
below 30% (low battery condition).
• Active alarm on the BPS.
Verify that BPS ACin cable is plugged in, and that utility power is
1
present.
Check the NAS appliance event log for messages if the BPS is on
2
battery power.
Restore utility power.
3
Troubleshooting
187