Configuring Your System For The First Time; Configuring Preferences - HP 2000fc Reference Manual

2
CH A P T E R
Configuring Your System for the First
Time
This chapter describes how to use SMU to configure your system for the first time.
It contains the following sections:
"Configuring Preferences" on page 29
■
"Configuring User Access" on page 31
■
"Managing Licenses" on page 35
■
"Setting System Information" on page 37
■
"Setting Date and Time" on page 37
■
"Configuring Host Ports" on page 39
■
"Configuring iSCSI Login Authentication" on page 45
■
"Configuring Ethernet Management Ports" on page 48
■
"Configuring Network Management Services" on page 52
■
"Configuring Event Notification" on page 53
■
"Changing the Cache Redundancy Mode" on page 58
■
"Saving the Configuration to a File" on page 60
■
"Restarting and Shutting Down a Controller" on page 61
■

Configuring Preferences

You can configure SMU preferences to meet your needs. When you change
preferences, the change takes effect immediately for the current SMU session but
does not affect other active sessions logged in to either controller. SMU sessions
started after the preferences are changed use the new preferences.
To configure preferences:
1. Select Manage > General Config > System Preferences.
29