Canceling A Volume Copy - HP 2000fc Reference Manual

Volume is presented to all hosts not explicitly mapped – Specifies whether the
■
volume is visible to all connected hosts. If the value is Yes, the LUN is also
shown.
Volume Serial Number – Serial number of the volume being created.
■
Source Volume Name – Name of the volume being copied.
■
Percent Complete – Percent complete of the volume copy.
■
Volume Copy Status – Indicates whether the destination volume is Unavailable or
■
Suspended.
Status Reason – The status is Unavailable while the volume-copy operation is in
■
progress. The status is Suspended if the source volume goes offline while the
copy is in progress. When the source volume comes back online, the copy
process resumes from the point where it stopped.

Canceling a Volume Copy

You can cancel an in-progress volume-copy operation. When the cancellation is
complete, the destination volume is deleted.
To cancel an in-progress volume copy:
1. Select Manage > Volume Management > Volume-Copy Services > Abort Volume-
Copy.
For each virtual disk, the virtual disk panel shows a status icon; the name, RAID
level, size, number of disk drives, and number of volumes; and utility status, if any.
2. Select either the source volume's virtual disk or the destination volume's virtual
disk.
The selected virtual disk's volume names, sizes, and types are displayed, and the
amount of free space. The destination volume's type is Standard*.
3. Select either the source volume or the destination volume.
4. Click Abort Volume Copy.
A confirmation prompt is displayed.
5. Click OK to confirm the operation or Cancel to stop it.
If you clicked OK, a message indicates whether the operation succeeded. If it
succeeded, the destination volume is removed from the Volume Menu panel.
126 HP StorageWorks 2000 Family Modular Smart Array reference guide • August 2008