HP 2000fc Reference Manual page 289

TABLE E-1 Event Descriptions and Recommended Actions (Continued)
Event
Code Event Type
176 Informational
177 Informational
178 Informational
179 Informational
180 Informational
181 Informational
182 Informational
183 Informational
185 Informational
186 Informational
187 Informational
188 Informational
Description
The error statistics for the specified
drive have been reset.
The cache data for a missing volume
was purged.
A host has been added to the list of
hosts that can access, or be denied
access to, a LUN. An Add Host
command was successful.
A host has been removed from the list
of hosts that can access or be denied
access to a LUN.
Hosts can either access, or be denied
access to, a LUN. This event
indicates when a host list type is
changed from include (to allow
access) to exclude (to deny access) or
from exclude to include.
Advanced Network Interface
Structure was set. The Management
Controller configuration has been
changed.
All busses have been paused. I/O will
not be performed on the drives until
all busses are unpaused.
All busses have been unpaused,
meaning that I/O can resume. An
unpause initiates a rescan.
An EMP write command has
completed.
Enclosure parameters have been set.
The write-back cache has been
enabled due to a battery state change.
Write-back cache has been disabled
due to a battery state change.
Recommended Action
Appendix E Event Codes 289