To reset statistics:
1. Select Monitor > Statistics > Reset All Statistics.
2. Click the button for the statistics you want to reset.
A message is displayed indicating whether the reset succeeded.
Displaying Notification Events
The Show Notification Events panel shows events that have occurred that were
selected for Visual Notification. This panel specifies how many notification events
are pending and shows up to a configured maximum number of events. To change
the maximum number of events to show, see "Configuring Visual Alerts" on
page 55.
To show visual events:
1. Select Monitor > Status > Show Notification.
If events have occurred, the following information is displayed:
Severity Level – Critical, Warning, or Info.
■
Date/Time – Year, month, day, and time when the event occurred.
■
Event Code – Event code that assists service personnel when diagnosing
■
problems.
Event Serial Number – An identifier for the event. The prefix (A or B) indicates
■
which controller logged the event.
Message – Information about the event.
■
Alert Method – Icons representing the notification methods configured for this
■
event type:
■
■
■
2. Acknowledge the events by clicking one of the following buttons:
Acknowledge Above Events – Acknowledges the events on the page and if there
■
are more notification events, these subsequently are displayed.
Acknowledge All Events – Acknowledges all of the events without necessarily
■
showing them on the page.
178
HP StorageWorks 2000 Family Modular Smart Array reference guide • August 2008
– Visual alert
– Email alert
– SNMP trap