On the Manage CHAP page you can create, view, modify, and delete entries. Panels
on this page have these icons:
■
■
■
Creating a CHAP Entry
To create a CHAP entry:
1. Select Manage > General Config > Manage CHAP.
2. In the CHAP Entries panel click Add New Entry.
The Create CHAP Entry panel is displayed.
3. Specify authentication data:
Node Name – Select an originator name from the list. The list contains host node
■
names from the global host list that do not already have CHAP entries.
Secret – The secret that the recipient uses to authenticate the originator. The
■
secret is case sensitive and can include 12–16 characters.
Name, if Mutual CHAP – Optional; for mutual CHAP only. Specifies the
■
recipient name, which is typically the recipient's IQN. The name is case sensitive
and can include a maximum of 223 characters.
The storage system's IQN is shown on the Host Port Status page; see "Host Port
Status" on page 152.
Secret, if Mutual CHAP – Optional; for mutual CHAP only. Specifies the secret
■
that the originator uses to authenticate the recipient. The secret is case sensitive
and can include 12–16 characters. A storage system's secret is shared by both
controllers.
4. Click Create Entry.
The new entry is displayed in the CHAP Entries panel.
46
HP StorageWorks 2000 Family Modular Smart Array reference guide • August 2008
– Click to show the panel's content.
Expand panel icon
– Click to hide the panel's content.
Collapse panel icon
– Click to cancel creating an entry.
Cancel icon