HP 2000fc Reference Manual page 162

Location – Enclosure location, if set.
■
Status – Specifies whether the enclosure is OK or has an error.
■
Misc – Enclosure ID, which is 0 for a controller enclosure and increments from 1
■
for attached drive enclosures.
World Wide Name – Enclosure node World Wide Name.
■
Model – Enclosure model number.
■
Rack:Position – Assigned rack number and position of the enclosure within the
■
rack, or 0:0 if not set. Position 1 is the top and 16 is the bottom.
Firmware Version – Version of the Expander Controller, which performs SES
■
functions.
CPLD Revision – Revision of the complex programmable logic device (CPLD).
■
The Components of Enclosure panel shows the status and other available
information about non-drive components in the enclosure:
Component – Component name and location (as viewed from the back of the
■
enclosure)
Status – OK or error
■
Details – Status details such as current temperature and voltage
■
The Enclosure Drive List panel shows the slot number, node WWN, and status of
each installed disk drive. If the system is unable to communicate with an enclosure
or its drives, messages appear as described in "Enclosure View is Unavailable" on
page 157.
162 HP StorageWorks 2000 Family Modular Smart Array reference guide • August 2008