HP 2000fc Reference Manual page 100

b. To set read-write or read-only access on one or more ports, specify a LUN and
select port access privileges. More than one host can use the same LUN to access
the same volume. A mapping cannot include both read-write and read-only
access.
c. Click Map It.
When processing is complete, the page shows the mapping changes.
5. To add or change an explicit mapping for the selected volume:
a. In the Assign Host Access Privileges panel, select a host.
b. To set read-write or read-only access on one or more ports, specify a LUN and
select port access privileges. More than one host can use the same LUN to access
the same volume. A mapping cannot include both read-write and read-only
access.
c. Click Map It.
When processing is complete, the page shows the mapping changes.
6. To remove an explicit mapping:
a. In the Assign Host Access Privileges panel, select a host.
b. Click Unmap It.
When processing is complete, the mapping is removed from the page.
Managing Volume Mappings on an iSCSI System
Caution –
limit access to volumes when the volumes are not in use. Be sure to unmount a
mapped volume from a host system before changing the mapping's LUN.
To manage host-to-volume mappings:
1. Select Manage > Volume Management > Volume Mapping > Map Hosts To Volume.
For each virtual disk, the virtual disk panel shows a status icon; the name, RAID
level, size, number of disk drives, and number of volumes; and utility status, if any.
2. Select a virtual disk.
The selected virtual disk's volume names, sizes, default LUNs, and types are
displayed.
100 HP StorageWorks 2000 Family Modular Smart Array reference guide • August 2008
Volume mapping changes take effect immediately. Make changes that