Configuring A System For The First Time - HP AA988A - Modular Smart Array Storage Controller SCSI User Manual

4
CH A P T E R

Configuring a System for the First Time

This chapter describes how to perform first-time configuration on the storage
system using HP StorageWorks MSA2000 Family Storage Management Utility
(SMU), which is the primary interface for configuring and managing the system. It
also describes how to perform basic storage configuration to verify that your system
is working.
This chapter includes the following topics:
"Setting Management Port IP Addresses Using the CLI" on page 42
■
"Configuring Your Web Browser for SMU" on page 46
■
"Logging in to SMU from a Local Management Host" on page 46
■
"Updating Firmware" on page 47
■
"Setting the Date and Time" on page 47
■
"Creating Virtual Disks" on page 48
■
"Mapping a Volume to a Host" on page 50
■
"Testing the Configuration" on page 50
■
"Logging Out of SMU" on page 51
■
For information about additional configuration and management tasks, including
changing the
guide.
user's password, refer to SMU's online help or the reference
manage
41