Figure 4-6. Removing and Installing an I/O Module
1
1
I/O connector cover
3
release latch
Installing an I/O Module
NOTE:
The I/O module must be installed in the appropriate I/O bay. See "Guidelines
for Installing I/O Modules" on page 48.
When installing I/O modules or blanks in the I/O module bays in the back of
our system enclosure, you must install them in right-to-left order:
•
A module (or blank) must be installed in bay A2, then bay B2, then bay
C2.
•
Next, a module (or blank) must be installed in bay C1, then bay B1, then
bay A1.
2
2
4
Installing Enclosure Components
3
I/O module
handle
4
275