Sata Settings Screen (Poweredge M610, M610X) - Dell 8 Owner's Manual

Option
Adjacent Cache Line
Prefetch
(Enabled default)
Hardware Prefetcher
(Enabled default)
DCU Streamer
Prefetcher
(Enabled default)
Data Reuse
Execute Disable
(Enabled default)
Number of Cores per
Processor
(All default)
Intel<R> QPI
Bandwidth Priority
Turbo Mode
C States (Enabled
default)
Processor X Family-
Model-Stepping

SATA Settings Screen (PowerEdge M610, M610x)

Option
Embedded SATA
(ATA Mode default)
Port A
(Auto default)
Port B
(Auto default)
132
Using the System Setup Program and UEFI Boot Manager
Description
Enable or disables system optimization for sequential
memory access.
Enables or disables the hardware prefetcher.
Enables or disables DCU streamer prefetcher.
Enables or disables data reuse in cache.
When set to Enabled, Execute Disable Memory Protection
Technology is enabled.
If set to All, all cores in each processor are enabled.
Sets the bandwidth priority to compute.
If supported by the processor(s), enables or disables Turbo
Mode.
When set to Enabled, the processor(s) can operate in all
power states.
Displays the family and model number of each processor. A
submenu displays the core speed, the amount of cache
memory, and the number of cores of the processor(s).
Description
ATA Mode enables the integrated SATA controller. Off
disables the controller.
Auto enables BIOS support for the device attached to
SATA port A. Off disables BIOS support for the device.
Auto enables BIOS support for the device attached to
SATA port B. Off disables BIOS support for the device.