Dell 8 Owner's Manual page 95

Table 1-25. LCD Status Messages
Code Text
E1229 CPU # VCORE
Regulator
failure.
Reseat CPU.
E122A CPU # VTT
Regulator
failure.
Reseat CPU.
E122C CPU Power
Fault. Power
cycle AC.
E122D Memory
Regulator #
Failed.
Reseat DIMMs.
E122E On-board
regulator
failed. Call
support.
E1310 Fan ## RPM
exceeding
range. Check
fan.
(continued)
Cause
Specified processor
VCORE voltage regulator
has failed.
Specified processor VTT
voltage regulator has failed.
A power fault was detected
when powering up the
processor(s).
One of the memory
regulators has failed.
One of the on-board
voltage regulators failed.
Speed of the specified fan is
outside of the intended
operating range.
Corrective Actions
Reseat the processor(s).
See "Troubleshooting
Processors" on page 300.
If the problem persists,
see "Getting Help" on
page 337.
Reseat the processor(s).
See "Troubleshooting
Processors" on page 300.
If the problem persists,
see "Getting Help" on
page 337.
Remove AC power to the
system for 10 seconds and
restart the system.
If the problem persists,
see "Getting Help" on
page 337.
Reseat the memory
modules. See
"Troubleshooting Blade
Memory" on page 297.
Remove AC power to the
system for 10 seconds and
restart the system.
If the problem persists,
see "Getting Help" on
page 337.
See "Troubleshooting Fan
Modules" on page 293.
About Your System
95