System Setup Options - Dell 8 Owner's Manual

System Setup Options

NOTE:
The options for the System Setup program change based on the system
configuration.
NOTE:
The System Setup program defaults are listed under their respective
options, where applicable.
Option
System Time
System Date
Memory Settings
Processor Settings
SATA Settings
Boot Settings
Integrated Devices
PCI IRQ Assignment Displays a screen to change the IRQ assigned to each of the
Serial
Communication
Power Management
System Security
Keyboard NumLock
(On default)
Report Keyboard
Errors
(Report default)
Description
Sets the time on the system's internal clock.
Sets the date on the system's internal calendar.
See "Memory Settings Screen" on page 130.
See "Processor Settings Screen" on page 131.
See "SATA Settings Screen (PowerEdge M610, M610x)" on
page 132.
See "Boot Settings Screen" on page 133.
See "Integrated Devices Screen" on page 133.
integrated devices on the PCI bus, and any installed
expansion cards that require an IRQ.
See "Serial Communication Screen" on page 135.
See "Power Management Screen (PowerEdge M910, M710,
M710HD, M610 and M610x Only)" on page 136.
See "System Security Screen" on page 137.
Determines whether your system starts up with the NumLock
mode activated on 101- or 102-key keyboards (does not apply
to 84-key keyboards).
Enables or disables reporting of keyboard errors during the
POST. Select Report for host systems that have keyboards
attached. Select Do Not Report to suppress all error messages
relating to the keyboard or keyboard controller during POST.
This setting does not affect the operation of the keyboard
itself if a keyboard is attached to the system.
Using the System Setup Program and UEFI Boot Manager
129