System Halted - Dell 8 Owner's Manual

Table 1-26. Blade Messages
Message
MEMTEST lane
failure detected
on
Processors with
different power
rating detected!

System halted

Processors with
different logical
processors
detected!
System halted
CPUs with
different core
sizes detected!
System halted
CPU x installed
with no memory
Unused memory
detected. DIMM's
installed in the
following slot are
not available when
in Mirror or 128-
Bit Advanced ECC
modes: x,x,x
110
About Your System
(continued)
Causes
Invalid memory
configuration. A
mismatched DIMM is
installed.
Mismatched processors are
installed.
Memory modules are
required but not installed
in the indicated processor's
memory slots.
The memory
configuration is not
optimal for mirroring or
Advanced ECC Memory
Mode. Modules in the
specified slot(s) are
unused.
Corrective Actions
Ensure that the memory
modules are installed in a
valid configuration. See
"System Memory" on
page 159.
Ensure that all processors
have the same cache size,
number of cores and logical
processors, and power
ratings, and that they are
properly installed. See
"Processors" on page 225.
Install memory modules for
the processor. See "System
Memory" on page 159.
Reconfigure the memory for
Memory Mirroring or
Advanced ECC Memory
Mode, or change the
memory mode to Optimized
in the BIOS setup screen.
See "System Memory" on
page 159.