Power Management Screen(Poweredge M910, M710, M710Hd, M610 And M610X Only) - Dell 8 Owner's Manual

Option
Remote Terminal Type
(VT 100/VT 220
default)
Redirection After Boot
(Enabled default)
Power Management Screen (PowerEdge M910, M710, M710HD, M610
and M610x Only)
Option
Power Management
CPU Power and
Performance
Management
Fan Power and
Performance
Management
Memory Power and
Performance
Management
136
Using the System Setup Program and UEFI Boot Manager
Description
Select either VT 100/VT 220 or ANSI.
Enables or disables BIOS console redirection after your
system boots to the operating system.
Description
Options are OS Control, Active Power Controller,
Custom, or Maximum Performance.
If you select OS Control, Active Power Controller, or
Static Management Performance, the BIOS
preconfigures the remaining options on this screen. If you
select Custom, you can configure each option
independently.
Options are OS DBPM, System DBPM, Maximum
Performance, or Minimum Power.
Options are Maximum Performance or Minimum Power.
Options are Maximum Performance, a specified
frequency, or Minimum Performance.