Memory Settings Screen - Dell 8 Owner's Manual

Poweredge modular systems
Hide thumbs Also See for 8:
Table of Contents

Advertisement

Option
F1/F2 Prompt on
Error (Enables
default)

Memory Settings Screen

Option
System Memory Size
System Memory Type
System Memory Speed Displays the system memory speed.
System Memory
Voltage (PowerEdge
M710HD)
Video Memory
System Memory Testing
(Enabled default)
Memory Operating
Mode
(PowerEdge M710,
M710HD, M610, and
M610x)
Memory Optimizer
(Enabled default)
(PowerEdge M905,
M805, and M605)
130
Using the System Setup Program and UEFI Boot Manager
Description
Enables the system to halt on errors during POST, which
allows the user to observe events that may scroll by unnoticed
during normal POST. You can select <F1> to continue or
<F2> to enter the System Setup program.
CAUTION:
When setting this option to Disabled, the
system does not halt if an error occurs during POST. Any
critical errors will be displayed and logged in the system
event log.
Description
Displays the amount of system memory.
Displays the type of system memory.
Displays the current operating voltage of the system
memory.
Displays the amount of video memory.
Specifies whether system memory tests are run at system
boot. Options are Enabled and Disabled.
This field displays the type of memory operation if a valid
memory configuration is installed. When set to Optimizer
Mode, the two memory controllers run in parallel 64-bit
mode for improved memory performance. When set to
Mirror Mode, memory mirroring is enabled. When set to
Advanced ECC Mode, the controllers are joined in 128-bit
mode running multi-bit advanced ECC.
If set to Disabled, the two DRAM controllers operate in
128-bit mode, and memory reliability is enhanced. If set to
Enabled, the memory controllers operate independently in
64-bit mode, and memory performance is optimized.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents