Dell 8 Owner's Manual page 224

4 Lift up on the left side of the impedance wall to release it from the chassis
inner wall, then slide the impedance wall out of the slot on the expansion-
card riser. See Figure 3-35.
5 Lift the expansion-card riser off the riser guide posts and out of the system.
See Figure 3-38.
Figure 3-38. Installing or Removing the Expansion-Card Riser (PowerEdge M610x Only)
7
6
5
1 expansion-card riser
3 expansion-card slot 1
5 riser guide post (2)
7 data cable connector (2 front, 2 back)
224
Installing Blade Components
1
4
2 riser guide (2)
4 expansion-card slot 2
6 power cable connector
2
3