Table of Contents
Advertisement
Menu Item
Description
Logical Processor
Allows you to enable or disable the OS capability to put logical processors in the
Idling
idling state in order to reduce power consumption. By default, the option is set to
Disabled.
Number of Cores
Allows you to control the number of enabled cores in each processor. By default,
per Processor
the Number of Cores per Processor option is set to All.
Processor 64-bit
Specifies if the processor(s) support 64-bit extensions.
Support
Processor Core
Displays the maximum core frequency of the processor.
Speed
Processor Bus
Displays the bus speed of the processors.
Speed
Processor 1
Family-Model-
Displays the family, model and stepping of the processor as defined by Intel.
Stepping
Brand
Displays the brand name reported by the processor.
Level 2 Cache
Displays the total L2 cache.
Level 3 Cache
Displays the total L3 cache.
Number of Cores
Displays the number of cores per processor.
SATA Settings Screen
Menu Item
Description
Embedded SATA
Allows the embedded SATA to be set to Off, ATA, AHCI, or RAID mode. By default,
Embedded SATA is set to AHCI Mode.
Port A
Auto enables BIOS support for the device attached to SATA port A. By default, Port
A is set to Auto.
Port B
Auto enables BIOS support for the device attached to SATA port B. By default, Port
B is set to Auto.
Port C
Auto enables BIOS support for the device attached to SATA port C. By default, Port
C is set to Auto.
Port D
Auto enables BIOS support for the device attached to SATA port D. By default, Port
D is set to Auto.
Port E
Auto enables BIOS support for the device attached to SATA port E. By default, Port
E is set to Auto.
20
NOTE: The processor bus speed option displays only when both the
processors are installed.
NOTE: The following settings are displayed for each processor installed in the
system.
Advertisement
Table of Contents
Troubleshooting
