Sata Settings Screen - Dell PowerEdge C6320 Owner's Manual

Menu Item
Processor 1
Family-Model-Stepping
Brand
Level 2 Cache
Level 3 Cache
Number of Cores

SATA Settings screen

You can use the SATA Settings screen to view the SATA settings of SATA devices and enable RAID on
your system.
To view the SATA Settings screen, click System Setup Main Menu > System BIOS > SATA Settings.
The SATA Settings screen details are explained as follows:
Menu Item
Embedded SATA
Security Freeze Lock
Write Cache
Port A
Model
Drive Type
Capacity
Port B
Model
Drive Type
Capacity
Description
NOTE: Depending on the number of installed CPUs,
there may be up to four processor listings. The following
settings are displayed for each processor installed in the
system.
Displays the family, model, and stepping of the processor as
defined by Intel.
Displays the brand name reported by the processor.
Displays the total L2 cache.
Displays the total L3 cache.
Displays the number of cores per processor.
Description
Enables the embedded SATA option to be set to Off, ATA, AHCI, or RAID
modes. By default, the Embedded SATA option is set to AHCI.
Sends Security Freeze Lock command to the Embedded SATA drives
during POST. This option is applicable only to ATA and AHCI modes.
Enables or disables the command for Embedded SATA drives during
POST.
Sets the drive type of the selected device. For Embedded SATA settings
in ATA mode, set this field to Auto to enable BIOS support. Set it to OFF
to turn off BIOS support.
For AHCI or RAID mode, BIOS support is always enabled.
Displays the drive model of the selected device.
Displays the type of drive attached to the SATA port.
Displays the total capacity of the hard drive. This field is undefined for
removable media devices such as optical drives.
Sets the drive type of the selected device. For Embedded SATA settings
in ATA mode, set this field to Auto to enable BIOS support. Set it to OFF
to turn off BIOS support.
For AHCI or RAID mode, BIOS support is always enabled.
Displays the drive model of the selected device.
Displays the type of drive attached to the SATA port.
Displays the total capacity of the hard drive. This field is undefined for
removable media devices such as optical drives.
31