Displaying Lag Information; Displaying Vlan Information; Displaying Fcoe Login Groups; Displaying Qos Information - Brocade Communications Systems 8 Administrator's Manual

19

Displaying LAG information

Displaying LAG information
Use the following procedure to display LAG information.
1. Select the CEE tab on the Switch Administration panel.
2. Select the Link Aggregation tab.

Displaying VLAN information

Use the following procedure to display VLAN information.
1. Select the CEE tab on the Switch Administration panel.
2. Select the VLAN tab.

Displaying FCoE login groups

Use the following procedure to display FCoE login group information.
1. Select the CEE tab on the Switch Administration panel.
2. Select the FCoE Login tab.

Displaying QoS information

Use the following procedure to display QoS information.
1. Select the CEE tab on the Switch Administration panel.
2. Select the QoS tab.
266
DRAFT: BROCADE CONFIDENTIAL
•
Connected Peer Type displays the port type on the connected device.
•
Is Directly Connected indicates whether or not the device is directly connected to the
trunk.
•
FCoE Port MAC displays the FCoE port MAC address.
•
Switch Port displays the switch port WWN.
The LAG information displays.
The VLAN information displays.
The FC0E login group information displays.
From the QoS tab, you can select the CEE Map tab to display CEE map information, or select
the Traffic Class Map tab to display traffic class maps information.
Web Tools Administrator's Guide
53-1001772-01