Egp Group; Transmission Group; Snmp Group - Brocade Communications Systems 8 Reference Manual

2
udpLocalPort 1.3.6.1.2.1.7.5.1.2
udpLocalPort 1.3.6.1.2.1.7.5.1.2
The local port number for this UDP listener.

EGP group

Brocade does not support the EGP group. This section is not applicable. Refer to the RFC1213 for
complete information regarding the EGP group.

Transmission group

Brocade does not support the Transmission group. This section is not applicable. Refer to the
RFC1213 for complete information regarding the Transmission group.

SNMP group

Implementation of the SNMP group is mandatory for all systems that support an SNMP protocol
entity. Some of the objects defined next are zero-valued in those SNMP implementations that are
optimized to support only those functions specific to either a management agent or a management
station. All of the objects that follow refer to an SNMP entity, and there might be several SNMP
entities residing on a managed node (for example, if the node is acting as a management station).
snmpInPkts 1.3.6.1.2.1.11.1
The total number of messages delivered to the SNMP entity from the transport service.
snmpOutPkts 1.3.6.1.2.1.11.2
The total number of SNMP messages that were passed from the SNMP protocol entity to the
transport service.
snmpInBadVersions 1.3.6.1.2.1.11.3
The total number of SNMP messages that were delivered to the SNMP protocol entity and were for
an unsupported SNMP version.
snmpInBadCommunityNames 1.3.6.1.2.1.11.4
The total number of SNMP messages delivered to the SNMP protocol entity that used a SNMP
community name not known to said entity.
52 Fabric OS MIB Reference
53-1001768-01