Dolby Digital Mode And Dts Surround (Only With Digital Input) - Denon AVR-5805CI Operating Instructions Manual

Basic Operation
STANDARD SURROUND PARAMETER
CURSOR ENTER
Dolby Digital mode and DTS Surround
(only with digital input)
1
STANDARD
Press the
"STANDARD (Dolby/DTS Surround)" mode.
2
Play a program source with the
mark.
• The Dolby Digital indicator lights
when playing Dolby Digital
sources.
• The DTS indicator lights when
playing DTS sources.
Press the SURROUND BACK button.
Lights when the Surround Back channel is on.
Set to "1spkr"
lights
3
SURROUND PARAMETER
Press the
• The surround parameter menu appears.
4 CURSOR
Press the
parameter.
5
CURSOR
Press the
setting.
6
ENTER
Press the or
button to complete the setting.
SURROUND BACK
button to select
,
lights
lights
Set to "2spkrs"
lights
button.
D D or H H button to select the
F F or G G button to select the
SURROUND PARAMETER
NIGHT
ENTER
SURROUND
PARAMETER
• Select "Default Yes" and press the CURSOR F F button to
reset all the settings.
Surround parameters e
2
CINEMA EQ. (Cinema Equalizer):
The Cinema EQ function gently decreases the level of the
extreme high frequencies, compensating for overly-bright
sounding motion picture soundtracks. Select this function if
the sound from the front speakers is too bright.
This function only works in the Dolby Pro Logic
Pro Logic, Dolby Digital, DTS Surround, DTS NEO:6 and
WIDE SCREEN modes.
D.COMP. (Dynamic Range Compression):
Motion picture soundtracks have tremendous dynamic
range (the contrast between very soft and very loud
sounds). For listening late at night, or whenever the
maximum sound level is lower than usual, the Dynamic
Range Compression allows you to hear all of the sounds in
the soundtrack (but with reduced dynamic range). (This
only works when playing program sources recorded in
Dolby Digital or DTS.) Select one of the four parameters
("OFF", "LOW", "MID" (middle) or "HI" (high)). Set to
OFF for normal listening.
This parameter is displayed only when playing compatible
sources in DTS mode.
LFE (Low Frequency Effect):
This sets the level of the LFE (Low Frequency Effect)
sounds included in the source when playing program
sources recorded in Dolby Digital, DTS, DVD-Audio or
Super Audio CD.
Program source and adjustment range:
1. Dolby Digital: –10 dB to 0 dB
2. DTS Surround: –10 dB to 0 dB
When DTS encoded movie software is played, it is
recommended that the LFE LEVEL be set to 0 dB for
correct DTS playback.
When DTS encoded music software is played, it is
recommended that the LFE LEVEL be set to –10 dB for
correct DTS playback.
TONE:
This adjusts the tone control (
This can be set individually for the separate surround mode other
than PURE DIRECT, DIRECT and Home THX Cinema mode.
54
STANDARD
CURSOR
II
x, Dolby
page 63, 64).