Connecting Other Sources
Connecting the pre-out terminals
• Use these terminals if you wish to connect external power amplifier(s) to increase the power of the front, center, surround and
surround back sound channels, or for connection to powered loudspeakers.
• When using only one surround back speaker, connect it to left channel.
• By changing the MAIN ZONE channel settings, up to three subwoofers can be connected to the AVR-5805CI.
For more information about "Setting the Channel Setup" (
Connecting the power supply cord
• The AC outlets can be set to turn on and off for the different functions.
For details, see "Setting the AC Outlet Assignment" (
NOTE:
• Only use the AC OUTLETS for audio equipment. Never use them for hair driers, TVs or other electrical appliances.
• Insert the plugs securely. Incomplete connections will result in the generation of noise.
A
L
R
B
A
L
R
A
L
R
A
L
R
B
page 126 ~ 128).
Power supply cord
(Supplied)
AC OUTLETS
• SWITCHED (total capacity – 120 W (1 A.))
The power to these outlets is turned on and off in
conjunction with the POWER switch on the main unit,
and when the power is switched between on and
standby from the remote control unit.
No power is supplied from these outlets when this
unit's power is at standby. Never connect equipment
whose total capacity is above 120 W (1 A.)
page 136).
42
Power amplifier
9.1ch AUDIO IN
FRONT
L
L
R
R
CENTER
SURROUND B
L
L
R
R
SURROUND
BACK
L
L
R
R
SURROUND A
L
L
R
R
SUB-
WOOFER
AC outlet (wall)
AC 120 V, 60 Hz