Zone2 Surround; User Mode Function Of Zone - Denon AVR-5805CI Operating Instructions Manual

ZONE2 Surround

• When ZONE2 is used with a 5.1 or 7.1 channel system,
various surround modes can be selected according to the
program source being played.
• The desired sound field can be achieved by adjusting the
parameters for the various surround modes.
1
Select the ZONE2 mode using the
button.
2 Select the surround mode for each input
channel.
q
STANDARD (Dolby
Digital/DTS Surround)
mode.
(Remote control unit)
The surround mode switches in the following order
each time the DSP SIMULATION button is pressed.
WIDE SCREEN SUPER STADIUM
VIRTUAL
MATRIX
VIDEO GAME MONO MOVIE
e
STEREO mode.
(Remote control unit)
See pages 49, 54 ~ 58, 61 for a description of the
features of the various surround modes.
The following surround modes can be selected in
ZONE2: STEREO,
SURROUND), 5/7CH STEREO, WIDE SCREEN, SUPER
STADIUM, ROCK ARENA, JAZZ CLUB, CLASSIC
CONCERT, MONO MOVIE, VIDEO GAME, MATRIX
and VIRTUAL.
3
SURROUND PARAMETER
Press the
• The surround parameter menu appears.
4
CURSOR
Press the
various surround parameters.
5
CURSOR
Press the
parameters setting.
6
ENTER
Press the or
button to complete the setting.
AMP
w
DSP surround
simulation mode.
(Remote control unit)
ROCK ARENA
JAZZ CLUB
CLASSIC CONCERT
r
5CH/7CH STEREO
mode.
(Remote control unit)
STANDARD (DOLBY/DTS
button.
D D or H H button to select the
F F or G G button to adjust the
SURROUND PARAMETER

USER MODE function of ZONE2

• The AVR-5805CI is equipped with a function for storing the
input source, auto surround mode and input mode settings
selected for the MAIN ZONE and ZONE2 in the memory so
they can be used whenever desired.
• For ZONE2, three patterns of settings can be stored in the
memory using the USER MODE 1, 2 and 3 buttons on the
Remote control unit.
• See page 60 for a description of the MAIN ZONE's "USER
MODE" function.
Storing the settings in the memory
2
1
Set the following to the desired status:
q ZONE2 input source
w ZONE2 auto surround mode
e ZONE2 input mode
2
Select the ZONE2 mode using the
button.
3
Press and hold the
the "USER 1 (2 or 3) MEMORY" is appears
on the ZONE2 monitor.
Calling the settings out
2
1
Select the ZONE2 mode using the
button.
2
USER MODE
Press the
settings you want to call out are stored.
97
Advanced Operation
AMP
USER MODE
button until
AMP
button at which the