Playing The Input Source - Denon AVR-5805CI Operating Instructions Manual

Basic Operation
SOURCE FUNCTION
HOME THX CINEMA
VIDEO SELECT SCALE
PHONES MONITOR SELECT

Playing the input source

1
Select the input source to be played.
• The input source indicator lights.
Example: CD
(Main unit)
To select the input source when ZONE2 SELECT,
ZONE3/4/REC SELECT or TUNING PRESET is
selected, press the SOURCE button on the main unit
then operate the FUNCTION konb.
2
Start playback on the selected component.
For operating instructions, refer to the component's
manual.
3
Adjust the volume.
(Main unit)
M.VOL. -80.0dB
The volume level is displayed on the master volume
indicator.
MATER VOLUME
VIDEO ON/OFF
SURROUND SPEAKER
ROOM EQ
(Remote control unit)
(Remote control unit)
ROOM EQ
SPEAKER
VIDEO SELECT
MUTE
FUNCTION
The volume can be adjusted within the range of –80.0
to +18.0 dB, in steps of 0.5 dB. However, when the
channel level is set (
volume for any channel is set at +0.5 dB or greater, the
volume cannot be adjusted up to 18.0 dB. (In this case
the maximum volume adjustment range is "18.0 dB —
(Maximum value of channel level)".)
Also, you may not be able to adjust the volume to the
maximum of 18.0 dB when internal volume
compensation control is activated due to the
combination of the surround mode and parameters,
downmixing from multi-channel audio signals into two
channels, etc.
To choose the surround sound mode
2
Example: HOME THX CINEMA
HOME THX CINEMA
Press the
For more information about the surround modes (
page 51 ~ 53).
To select the Room EQ function
2
ROOM EQ
Press the
For more information about the Room EQ function
( page 48).
44
HOME THX
CINEMA
MATER VOLUME
page 64, 65 or 134), if the
button.
button.