Selecting The Dolby Digital And Dts Surround Mode (Only With Digital Input) - Denon AVR-2307CI Operating Instructions Manual

Basic Operation
Selecting the Dolby Digital and DTS Surround
mode (only with digital input)
1
Select an input source for which digital (COAXIAL,
OPTICAL etc.) is set ( page 49).
2
INPUT MODE
Press to select "AUTO".
3
[STANDARD]
Press to select "STANDARD (Dolby/DTS
Surround)".
4
Play a program source with the
• " " or " " lights, depending on the source.
5
SURROUND PARAMETER
Press .
6
D D H H
Press to select the item, then press
CINEMA EQ.:
Use this if movie dialogues sound harsh to lower the treble sound.
Effective source mode
II
Dolby Pro Logic x / Dolby Pro Logic / Dolby Digital /
DTS Surround / DTS NEO:6
D.COMP.:
The dynamic range is compressed. Select one of four modes: "OFF",
"LOW", "MID" (middle) or "HIGH".
Effective source mode
Dolby Digital /
DTS (For DTS sources, only displayed for compatible software.)
LFE:
To play the various types of software properly, we recommend
setting to the values shown below.
• To play Dolby Digital software: "0 dB"
• To play DTS movie software: "0 dB"
• To play DTS music software: "–10 dB"
TONE:
Adjust the tone control.
Can be set in surround modes other than direct mode.
Can be set separately for the different surround modes. (Adjusted
together for the Dolby/DTS SURROUND modes.)
Room EQ:
Sets the equalizer individually for each surround mode.
• Normal, Front, Flat:
See page 63.
• Manual:
See page 57.
SB CH OUT:
, mark. Select the play mode or surround back channel playback method.
• The " " or "
(1) For multi-channel sources
• SB OFF (OFF):
Not played.
• NON MTRX:
F F G G
Surround channel signal played.
to set.
• MTRX ON:
Surround channel signal played with digital matrix processing.
• ES MTRX:
DTS signal played with digital matrix processing.
• ES DSCRT:
Signal included in DTS-ES discrete 6.1-channel sources played.
II
• PL x CINEMA:
Decoded in Dolby Pro Logic
played.
Set the surround back speaker to "2spkrs" at "Speaker
Configuration" (
• PL II x MUSIC:
Decoded in Dolby Pro Logic
played.
Set the surround back speaker to "1spkr" or "2spkrs" at
"Speaker Configuration" (
(2) For 2-channel sources
• OFF: Not played.
• ON: Surround channel signal played.
7 ENTER
Press or
" indicator lights.
II
x Cinema mode, surround back signal
page 60).
II
x Music mode, surround back signal
page 60).
SURROUND PARAMETER
.
28
ENGLISH
5
Example: Dolby Digital
• Select "Default Yes" and press F F to reset all the settings.
¢ Dialog normalization function
This operates automatically when playing Dolby Digital sources.
This is a function for automatically correcting the standard signal level
for different program sources. The correction value can be checked by
pressing STATUS.
D i a l . N o r m
O f f s e t - 4 d B
The numbers are the correction value when corrected to the standard level.
ENGLISH
Basic Operation
Example: DTS