Basic Operation
Playback
Operating the remote control unit
• The RC-1036 remote control has a backlit EL display whose
contents change according to the mode or function selected,
with the appropriate remote commands for that mode or
function.
2
Operate the this unit
AMP
The
button is the main mode for controlling
the AVR-5805CI in the main room (MAIN ZONE).
The function switches as shown below each time one of
the AMP button is pressed.
AMP
ZONE2
SYSTEM CALL
The EL display switches as shown below with respect to
the selected mode.
2
AMP mode
To operate the MAIN ZONE function.
ZONE3
ZONE4
43
ZONE2 mode
2
To operate the ZONE2 function.
ZONE3 mode
2
To operate the ZONE3 function.
ZONE4 mode
2
To operate the ZONE4 function.
SYSTEM CALL mode
2
To operate the "System call" function.
• This function provides the ability to program a series of
individual remote control codes into a macro stored under
one of the number pad's numeric choices (
page 84, 85).