Denon AVR-5805CI Operating Instructions Manual page 53

Surround parameters w
2
MODE/SB CH OUT:
Select the surround back channel playback method or
mode.
(1) (Multi channel source)
THX Surround EX:
Dolby Digital signals are played in the "THX Surround
EX" mode.
Ultra2 Cinema:
The signals are played in the THX Ultra2 Cinema mode.
Music Mode:
The signals are played in the THX Music mode.
Games Mode:
The signals are played in the THX Games mode.
NON MTRX:
The same signals as those of the surround channels are
output from the surround back channels.
MTRX ON:
The surround channel signals undergo digital matrix
processing and are output from the surround back
channels.
SB OFF (OFF):
No signal is played from the surround back channels.
ES MTRX:
When playing DTS signals, the surround back signals
undergo digital matrix processing for playback.
ES DSCRT:
When a signal identifying the source as a discrete 6.1
channel source is included in the DTS signals, the
surround back signals included in the source are played.
II
PL x Cinema:
Processing is performed with the Cinema mode of the
PL II x decoder and the surround back channel is
reproduced.
II
PL x Music:
Processing is performed with the Music mode of the
II
PL x decoder and the surround back channel is
reproduced.
(2) (2ch source)
OFF:
Playback is conducted without using the surround back
speaker.
ON:
Playback is conducted using the surround back speaker.
This operation can be performed directly pressing the
SURROUND BACK button.
AFDM (Auto Flag Detect Mode):
• ON:
This function only works with software on which a special
identification signal is recorded. This software is scheduled
to go on sale in the future.
This is a function for automatically playing in the 6.1
channel mode using the surround back speaker(s) if the
software is recorded in Dolby Digital EX or DTS-ES or in the
normal 5.1 channel mode without using the surround back
speaker(s) when the software is not recorded in Dolby
Digital EX or DTS-ES.
When AFDM is set to "ON" and the EX/ES flag is detected
automatically, the surround mode is fixed according to the
playing program source.
In this case, the "MODE/SB CH OUT" parameter can not
be selected on the surround parameter screen.
• OFF:
When the identification signal is detected automatically and
you would like to select the surround mode freely, set
AFDM to "OFF".
In this case, the "MODE/SB CH OUT" parameter can be
selected on the surround parameter screen regardless of
the playing program source.
Example: When playing software that has a Dolby Digital EX
flag
q
When AFDM is set to "ON", the surround mode is
automatically set to the "DOLBY DIGITAL + PL
CINEMA" mode. The surround parameter screen shown
at the below is displayed.
w
When you would like to play back with the "Dolby Digital
EX" mode, set AFDM to "OFF" and select "MTRX ON"
with "SB CH OUT".
Some discs recorded in Dolby Digital EX do not include EX
flag. If the playing mode does not switch automatically
when the AFDM turns "ON" during playback, manually set
"SB CH OUT" to "PL
53
Basic Operation
II x Cinema" or "MTRX ON".
II
x